Looking for PCB Supplier? Get in touch     

Home Products Product Comparison Chart

Product Comparison

Compare Low Cost Prototype & Production with Standard Prototype & Production. Choose one which best suits your requirement.

Standard Prototype and ProductionLow Cost Prototype and ProductionFeatures

  • AvailableNot AvailableFixed Engineering tooling cost*
  • AvailableAvailableFull Technical Support
  • AvailableAvailableFull Administrative Support
  • AvailableAvailableComplete Design Rule Check (i.e. Design Filtering)
  • AvailableAvailableFREE Design Consultation
  • AvailableAvailableRe-usable Engineering tooling
  • Not AvailableAvailableMulti-design Facility
    (i.e. more than one design per set up)**
  • AvailableAvailableAcceptance of Panelized Gerber
  • AvailableAvailableFREE Panelization service from our CAD department
  • AvailableAvailableAcceptance of any PCB/Panel size (must be in accordance with our technical capability)
  • AvailableAvailableRoHS finish (Lead-FREE HASL, Immersion Silver/Tin/Gold options)
  • AvailableAvailable100% Electrical Testing (BBT)
  • AvailableAvailableV-cut, Routing, Jump Scoring, Slots
  • AvailableAvailableNon-Standard PCBs (e.g. Thicker laminate, thicker copper, different colour of solder mask/overlay, peelable solder mask, gold tab for edge connectors,
    Blind/Buried vias, Impedance Control, Special
    plugged vias etc.)

*Engineering tooling cost increases in the step of every 200 sq.cm. of PCB/Panel area.
**Each extra design will increase one-off tooling cost. Maximum 4 different designs accepted per single set up.
 Multiple ups for each different design allowed.

PCB Design Tips

PCB Design Tips

When designing a PCB, try to limit the amount of draws you use. Draws use a lot of memory and slow the programming time. Use a flash for pads instead.

More tips

Our Capabilities

We have capability to manufacture Single Sided/Layer (SS), Double Sided/Layer (DS-NPTH & DS-PTH) and MultiLayer (up to 24 layers) PCBs with RoHS as an option.

Need to know more about
our capabilities?

Read more